August 15, 2022
Eight easy tips to extend your mobile device’s battery life


Most smartphones today pack big, high-resolution screens, powerful processors, and lots of memory to multitask and handle really complex tasks. This unfortunately also means that they struggle to handle a full day’s worth of heavy usage, and hence power banks are now an essential accessory.

The same can be said of our laptops, and as batteries age, the need to connect them to plug points increases. Most of our consumer electronics devices come with Lithium Ion and Lithium Poly batteries designed for quick recharging, not just long term life. Often, you’re better off replacing your battery than upgrading your laptop, because of how quickly batteries get old.

Whether you’re using a smartphone, tablet or laptop, here are some general purpose tips for extending its life and use between recharge cycles.

1) keep it cool
Exposing a battery to high temperatures can be more stressful than cycling it. According to Battery University, which runs a wide range of battery tests – cycling, elevated temperatures and aging cause your battery’s performance to degrade over time. Keeping your devices in a cool environment (a battery that stays above 30 °C (86 °F) is considered elevated temperature) will certainly extend the life cycle of your device.

laptop_cooling_pad.jpgIn testing, efficiencies dropped to 60 percent when exposed to 60-degree temperatures for three months and 65 percent when exposed to 40-degree temperatures. For this reason, don’t let your gadgets heat up like you’re baking in the sun inside the car.

,See also(How to extend the battery life of your smartphone, tablet and laptop)

This is a good reason to worry about the heating issue on a smartphone, as it can significantly reduce the battery life over time. On laptops, you should use a cooling pad to make sure the CPU vent is draining away. Exposure to dust can clog vents and cause your fans to run overtime, creating an additional resource burden, so keep the environment clean and dust free.

2) Choose paid apps instead of free ones
A study conducted by US-based researchers showed that ad-supported apps reduce battery life by an average of 2.5 to 2.1 hours. To quote the study, a phone’s processor is like its brain – and ads eat up a lot of that brain’s power, slowing it down.

Not all free apps are draining your battery, but if you are seeing ads on it then consider that it comes with bandwidth and processing burden. Spending a little on apps can pay off well, given that some apps are available for as little as Rs. 10 on both Google Play and App Store.

,read also: 10 Best Paid Android Apps)

On a laptop, running a local application to do something like text editing will consume less battery power than activating your browser and using an online resource. So, if you’re not using it, turn off your Wi-Fi connection – on a Windows PC it’s as easy as pressing fn+f2 on the keyboard. The exact function key may vary depending on the device manufacturer, so just look for the key with the Wi-Fi symbol next to it.

3) Turn off location tracking
According to a recent report, the Facebook app drains the battery of iPhone users because it is continuously tracking the user’s location using the GPS module. For apps that don’t need your location, turning off location tracking will definitely help.

locationmode_android.jpg

In most Android devices, you can go to Settings > Location, and toggle it to disable location tracking completely. The functionality to set app level permissions is enabled only in Android M.

On iOS 9, go here Settings > Privacy > Location Services And if you really need to, turn it off on a per-app basis, leaving location access only for important apps.

4) Partial recharge is better than full-depth recharge
Another priceless journey from Battery University can be explained with the metaphor of running a marathon. Keeping the depth of discharge between 30 and 80 percent of your battery capacity to 50 percent of your battery capacity, rather than letting your battery cycle all the way to zero from 100 percent capacity, can triple the number of discharge cycles.

,See alsoFive Simple Tips to Extend Your Phone’s Battery Life – From the People Who Built It)

Lenovo internalizes this principle into its battery maintenance settings in the Power Manager bundled with its laptop, which can be customized to best suit your needs. To adapt for many years of use, Lenovo recommends You set the charge threshold to start at 40 percent capacity, and stop at 50 percent.

5) Lower the display brightness
It’s an obvious tip that applies to both laptops and mobile devices. On most devices, brightness settings are easily accessible, and you can also apply screen dimming techniques through third-party apps like luxwhich overlays an opaque graphic to reduce the brightness and change the color cast of the screen.

display_brightness.jpg

However, a software layer Only OLED screens save power, while LCD screens can only save power by reducing the brightness of the backlight.

Reducing the amount of time your display is on while idle can also save a fractional amount of battery life. In Android, it can be accessed Settings > Display, on iOS, Adjustment , General , auto lock Allows you to tweak this setting.

On a Windows laptop, right-click the battery icon and click power options, change the setting to Energy Saver To maximize battery life – Windows will lower the brightness, and change standby and other settings to prioritize battery usage over display.

6) Schedule app updates over Wi-Fi or while you’re plugged in
In general, anything that is processor or bandwidth intensive is likely to consume a lot of CPU power. For the best standby time it is best to remain stable and enjoy Wi-Fi better than your data plan. For this reason, it’s best to schedule app updates to happen over Wi-Fi only, or if your device supports it while you’re plugged in.

appupdate_wifi.jpg

This setting can be accessed in the Play Store app on Android. Launch the app, then swipe up from the left side of the screen to open the menu. go for Settings > Auto-update Appschoose more Auto-update apps over Wi-Fi only, On iPhone or iPad Wi-Fi + Cellular, go to Settings > iTunes & App Store and turn use cellular data off.

7) Turn on Low Power Mode
Not all Android phones have battery saver mode, but if you’re on Android 5.0 or later (Lollipop) you likely have this feature. It automatically turns on when your battery hits 15 percent, and disables background app refresh, location tracking, and other syncing activity to save battery life. With Android Marshmallow, a new feature called Doze puts your phone into deep sleep mode when it’s unused for a long period of time. This feature is apparently doubling the standby time. Unfortunately, if you’re on an older phone, you won’t get this feature.

,read also(Six Android 6.0 Marshmallow Features You Should Look For Next)

With iOS 9, iPhones have Low Power Mode that minimizes background refresh, visual effects, and automatic downloads. can be accessed Adjustment , battery,

,read also20 Awesome Hidden Features of iOS 9)

If you’re using an older Android phone, your phone’s manufacturer may have included their own Low Power Mode feature – on Sony phones, for example, it’s called Stamina Mode, while HTC calls it Extreme Power Mode. says. There are also third-party apps you can try, although in our experience, the built-in apps are more effective.

8) Discover Flight Mode
The distance of the phone from the cellular tower also affects the standby time. So, if you’re in an unnetworked place, it’s best to switch your smartphone to airplane mode (called flight mode on some devices) to save battery life, rather than letting your phone constantly seek the tower. .

Follow these tips and you’ll find that your phone will last a little longer between recharges—and the fewer recharge cycles you let it go through in a day, the longer the overall battery life. You have some more tips and tricks to share? Let us know through comment.

Leave a Reply

Your email address will not be published.